PHL Metal Fabrication

Metal Work Services & Capabilities


At PHL we specialise in a range of metal work services.

We stock a wide range of:

  • Sheetmetal
  • Plate
  • Flatbar
  • Pipe
  • Tube
  • Angle
  • RHS

All this can be supplied in mild steel, aluminium and stainless steel, and we can accurately cut, bend, drill, punch and weld any of these materials to your requirements.

We are equipped with various metal working machinery.
The capabilities are as follows:


Our guillotine can cut material up to 3.1 metres long and has a thickness range from 0.6mm sheet metal up to 8mm thick plate.

130 Ton Brake Press

Our pressing capabilities vary depending on material lengths and tensile strength. We can press any sheet metal or plate up to 6mm thick at 3.2 metres long and shorter lengths of 8mm or 10mm plate.

Pipe Bending

We are capable of tube rolling 25mm and 32mm diameter. We can bend any size pipe up to 3″ diameter and also bend 20x20mm, 25x25mm and 40x40mm square tube.

80 Ton Hole Punch

80 ton punch and shear machine. Can punch holes from 6mm to 27mm. We also have a 30mm and 40mm capability and a selection of slotted punches.

Plate Rollers

We have a set of plate rollers that are capable of rolling 6mm plate x 2000mm wide, with a minimum radius of 120mm. Our machine has a swing out top roller which enables us to roll full cylinders.

Contact us today or call 0447 562 028 to see how we can assist you!

Copyright © 2020 PHL Metal Fabrication | Designed by Almost Anything